can I get some help setting up my router please?

[steveyos]

http://www.cisco.com/web/consumer/support/modem_DPC3825.html

there's like two firewalls both with over 9000 settings, but all the security features are off by default please hlep before flag gets me this is 2advanced4me


I can't find out how to check for firmware updates or even see what firmware version I have


so far I have changed the admin name/pass and the wireless name/pass and turned on unpnp

[steveyos]

I've tried googling this shit but all I can find is nerds talking about this shit like I already know what it all is

[steveyos]

this router has this big elaborate setup for parentel controls where I think you have to manually type in every porn site ever made and type in all the bad words my other router just had a simple three choices block phishing sites, block phishing sites and like somethigjn else, then block all that and porn it was very simple

[Autistic Spectrum]

um if you are paranoid about being hacked it's prb not best to post your router model number lmao

[steveyos]

this new one has port filtering, port range forwarding, and port range triggering, what one am I supposed to fill out for second life oh my g-d

[Autistic Spectrum]

does second life use a special port, i think it just goes over 80 like everything else

[steveyos]

um if you are paranoid about being hacked it's prb not best to post your router model number lmao

if any of you guys who actually knew how ot hack hwere going to hack me it wouldn't matter if I posted it or not, I'm not actually worried about any of hte lizards googling some hacks and doing it you guys walked that asus bastard guy through hwo to hack this forum and set it up for him and everything and he still couldn't do it

I would like to set it up properly though

[steveyos]

does second life use a special port, i think it just goes over 80 like everything else

I never actually had to forward ports for it I don't plan on forwarding any ports fuck games that can't just unpnp :twisted:

[steveyos]

I found the firmware I guess my isp controls it that sucks

[steveyos]

SPI Firewall Protection (currently off): Off Low Medium High

Filters
(not checked)Block fragmented IP packets
(not checked)Block Port Scan Detection
(not checked)IP Flood Detection
(not checked)Allowed Services
No Ports Restricted
Block WAN Requests
(checked)Block Anonymous Internet Requests


is this ok

[Autistic Spectrum]

if any of you guys who actually knew how ot hack hwere going to hack me it wouldn't matter if I posted it or not, I'm not actually worried about any of hte lizards googling some hacks and doing it you guys walked that asus bastard guy through hwo to hack this forum and set it up for him and everything and he still couldn't do it

I would like to set it up properly though

it's not very hard to search cisco router xxxxxx expolits stevey

[steveyos]

IPSec Passthrough: Enable Disable
PPTP Passthrough: Enable Disable


both enabled

[steveyos]

it's not very hard to search cisco router xxxxxx expolits stevey

yes but who's going to hack me besides the lizards?

[Autistic Spectrum]

SPI Firewall Protection (currently off): Off Low Medium High

Filters
(not checked)Block fragmented IP packets
(not checked)Block Port Scan Detection
(not checked)IP Flood Detection
(not checked)Allowed Services
No Ports Restricted
Block WAN Requests
(checked)Block Anonymous Internet Requests


is this ok


check all the filters

[Autistic Spectrum]

check all the filters and you will be fine

[steveyos]

do I need to change the spi firewall thing to low/med/high or can that stay off I can't tell if that is part of the checkbox thing

[Autistic Spectrum]

i bet that low med high thing just set's the filters for you

[steveyos]

ok I just clicked low medium and high and yeah in the allowed services box shit shows up, the thing is though low still says no ports restricted, and medium has GAME stuff in it and high doesn't


should I just keep it in high and if everything still works then good but if things don't work switch ot to medium then low?

[steveyos]

in high I can unfortunately still make posts at rubynet

[steveyos]

can't connect to steam I will try medium

[steveyos]

medium didn't work either, low does, but I don't know if low is actually protecting me from flaggerchats

[steveyos]

I would always get STRITCT NAT problems with warframe with my other things let me see if that still happens now

[Autistic Spectrum]

i would scan your ports first stevey, then i would proceed from there, don't think flaggerchat can do all that but idk

[Gentleman Doli]

if its on da net...............................

[steveyos]

GOD DAMMIT


textures in second life are doing the same thing like my other router, a bunch don't load all the way and stay blurry

I set it from low to off and without even having to restart the game everything is now loading perfect

[steveyos]

what is it with router firewalls not liking me

[steveyos]

if anyone hacked my computer they'd find them self in one of the emptiest computers in the world and eventually make their way to the emptiest bank account in the world so I'm not worried I have a clean install of windows 8 with second life and a few steam games

[steveyos]

gonna see if warframe still gives me strict nat bullshit with this crisco with the firewall off, warframe supports unpnp let's see if this thing actually does unpnp right

[steveyos]

every time I start warframe there's a 500-1000+mb patch but I don't ever see anything change lol

[steveyos]

~ 3MB/s hurry up fuck you

[steveyos]

no strict nat bullshit from warframe in both off and low settings!


second life actually uses over 9000 ports, so I'm gonna try portforward.com adn setting up a static ip

[steveyos]

btw thanks dp

[steveyos]

wow portforward.com doesn't have second life................................................................................................ .............................................................. I guess I can still use it to set up a static ip by choosing a differnt program since that step should be the same

[steveyos]

ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

Configuring your hardware firewall
Although the details depend on your specific firewall, follow this general procedure:
Open outbound access for TCP ports - Second Life servers do not establish inbound TCP connections to client systems running the Second Life Viewer software. Instead, they use the "request / response" message pattern. Enable outbound TCP access for ports 53, 80, 443, 12043, 12046 and 21002.
Open outbound "session" access for UDP ports- Although UDP is a session-less transport, many firewalls block unsolicited incoming UDP traffic to a particular port unless it has seen recent outgoing UDP traffic from that same port. Activate outbound UDP for ports 53, 3478, 3479, 5060, 5062, and 12000-29999.



http://i.imgur.com/iXCE9ow.png
http://i.imgur.com/a9Jy7uc.png
http://i.imgur.com/AToUhXu.png

[steveyos]

pretty sure I choose port range forwarding but does external = outbound and internal = inboud or something or do I just put 53 in all four boxes? FUCK WHY DOES THIS EVEN EXIST

[steveyos]

MOM, DAD, I THINK I DID IT!!!!!!!!!!!!!!

[steveyos]

http://i.imgur.com/Lg85zPN.jpg
http://i.imgur.com/yE16hmY.jpg

[steveyos]

all textures seem to keep loading until they're fully loaded and my new tattoo loaded right away