turns out this stock intel heatsink is a piece of shit, and all my crashes were temps going too high...
going to get a new heatsink that actually cools down, apply new paste, and ejaculate on my videocard whilst reading mein kampf and sieg heiling
Printable View
turns out this stock intel heatsink is a piece of shit, and all my crashes were temps going too high...
going to get a new heatsink that actually cools down, apply new paste, and ejaculate on my videocard whilst reading mein kampf and sieg heiling
what intel did to my dumb ass: gave me a factory overclocked CPU(K series are like that)
gave me a stock heatsink that is like 8 dollards at the store, couoldnt cool my ass
the default state of the CPU is too much for the stock heatsink to handle when using high demanding applications/games
never again will i use a stock heatsink...
when i replace the heatsink im going to probably put it back to 3.8 Mhz instead of 3.4...
been fucking around to see what this piece of junk can do now, i can only make it hit 4.4 Mhz at tops, doing short tests with a timer it heats up twice as fast than 3.4...
maybe, just maybe, i can keep it at 4.4 with an adequate heatsink and actually get good performance out of it.
never again will i overlook getting a decent heatsink, never again:9/11:
just did some video benchmarking from 3.4 Mhz and 4.4 Mhz, seriously doubled my FPS, watching the temps tho with this shitty stock heatsink hitting up to 89c(like 198325y81 farenheit)
stranger danger
thread summary: dont ever overlook getting a good heatsink
89 C lmao thats maximum, I get 19-25 C due to my thermal paste method, it wont change temp during 2 years
Dude Fahrenheit sucks, it doesnt make fucking sense
i use one i got from a server .it sticks out the side of my computer .2 fan,s does the jobQuote:
Originally Posted by cbarry
yea i hate the imperial systemQuote:
Originally Posted by juji
the only time i use the imperial system is when measuring height or muh dick
there's no such thing as a factory overclocked cpu, they're marked for the speed they've been tested to reliably run at. this is your motherboard;s fault.
http://ark.intel.com/products/52214
had it on turbo mode, dont remember if i did it or it was default
post your bench mark
Benchmarks
CPU Blowfish
CPU Blowfish
This Machine 2000 MHz 3.500
Intel(R) Celeron(R) M processor 1.50GHz (null) 26.1876862
PowerPC 740/750 (280.00MHz) (null) 172.816713
CPU CryptoHash
CPU CryptoHash
This Machine 2000 MHz 321.252
CPU Fibonacci
CPU Fibonacci
This Machine 2000 MHz 3.112
Intel(R) Celeron(R) M processor 1.50GHz (null) 8.1375674
PowerPC 740/750 (280.00MHz) (null) 58.07682
CPU N-Queens
CPU N-Queens
This Machine 2000 MHz 9.380
FPU FFT
FPU FFT
This Machine 2000 MHz 1.418
FPU Raytracing
FPU Raytracing
This Machine 2000 MHz 23.300
Intel(R) Celeron(R) M processor 1.50GHz (null) 40.8816714
PowerPC 740/750 (280.00MHz) (null) 161.312647
"When any of the electrical or thermal limits are reached, the operating frequency automatically decreases in decrements of 133 MHz/100 MHz until the processor is again operating within its design limits"
getting beaten by a laptop specific chip and a PPC from 1997, those are some p good numbersQuote:
Originally Posted by asux
maks post your benchmark
p just got the thing back up and runing after it crashed after a updateQuote:
Originally Posted by maks
I'm not going to do that because idgaf about benchmarks but I'm p sure I could beat a PPC G3 from 1997
Show me your thermal paste method
lol .
mine is oly a little one
Summary
Computer
Processor 4x AMD A10-6800K APU with Radeon(tm) HD Graphics
Memory 7448MB (1140MB used)
Operating System Ubuntu 13.10
User Name ad (fuckugoogle)
Date/Time Mon 02 Jun 2014 22:31:27 EST
its the black edition .
I'm using the stock heatsink and it already had the thermal paste on it
oh and mine is the k series too
my friend actually gave me a water coolimg thing but nope I just keep it stock