turns out this stock intel heatsink is a piece of shit, and all my crashes were temps going too high...
going to get a new heatsink that actually cools down, apply new paste, and ejaculate on my videocard whilst reading mein kampf and sieg heiling
Results 1 to 26 of 26
-
- Join Date
- Sep 2008
- Location
- i daer you to make it out of ferguson alive
- Posts
- 19,567
06-02-2014
-
- Join Date
- Sep 2008
- Location
- i daer you to make it out of ferguson alive
- Posts
- 19,567
06-02-2014what intel did to my dumb ass: gave me a factory overclocked CPU(K series are like that)
gave me a stock heatsink that is like 8 dollards at the store, couoldnt cool my ass
the default state of the CPU is too much for the stock heatsink to handle when using high demanding applications/games
never again will i use a stock heatsink...
when i replace the heatsink im going to probably put it back to 3.8 Mhz instead of 3.4...
been fucking around to see what this piece of junk can do now, i can only make it hit 4.4 Mhz at tops, doing short tests with a timer it heats up twice as fast than 3.4...
maybe, just maybe, i can keep it at 4.4 with an adequate heatsink and actually get good performance out of it.
-
-
-
-
-
-
06-02-2014
89 C lmao thats maximum, I get 19-25 C due to my thermal paste method, it wont change temp during 2 years
-
06-02-2014
Dude Fahrenheit sucks, it doesnt make fucking sense
-
-
-
-
06-02-2014
there's no such thing as a factory overclocked cpu, they're marked for the speed they've been tested to reliably run at. this is your motherboard;s fault.
-
- Join Date
- Sep 2008
- Location
- i daer you to make it out of ferguson alive
- Posts
- 19,567
06-02-2014http://ark.intel.com/products/52214
had it on turbo mode, dont remember if i did it or it was default
-
06-02-2014
post your bench mark
Benchmarks
CPU Blowfish
CPU Blowfish
This Machine 2000 MHz 3.500
Intel(R) Celeron(R) M processor 1.50GHz (null) 26.1876862
PowerPC 740/750 (280.00MHz) (null) 172.816713
CPU CryptoHash
CPU CryptoHash
This Machine 2000 MHz 321.252
CPU Fibonacci
CPU Fibonacci
This Machine 2000 MHz 3.112
Intel(R) Celeron(R) M processor 1.50GHz (null) 8.1375674
PowerPC 740/750 (280.00MHz) (null) 58.07682
CPU N-Queens
CPU N-Queens
This Machine 2000 MHz 9.380
FPU FFT
FPU FFT
This Machine 2000 MHz 1.418
FPU Raytracing
FPU Raytracing
This Machine 2000 MHz 23.300
Intel(R) Celeron(R) M processor 1.50GHz (null) 40.8816714
PowerPC 740/750 (280.00MHz) (null) 161.312647
-
06-02-2014
"When any of the electrical or thermal limits are reached, the operating frequency automatically decreases in decrements of 133 MHz/100 MHz until the processor is again operating within its design limits"
-
-
-
-
06-02-2014
I'm not going to do that because idgaf about benchmarks but I'm p sure I could beat a PPC G3 from 1997
-
-
06-02-2014
lol .
mine is oly a little one
Summary
Computer
Processor 4x AMD A10-6800K APU with Radeon(tm) HD Graphics
Memory 7448MB (1140MB used)
Operating System Ubuntu 13.10
User Name ad (fuckugoogle)
Date/Time Mon 02 Jun 2014 22:31:27 EST
-
-
steveyos666king steveyos06-02-2014
I'm using the stock heatsink and it already had the thermal paste on it
-
-
steveyos666king steveyos06-02-2014
my friend actually gave me a water coolimg thing but nope I just keep it stock
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)