Power Brick
Remove the big 15 pin connector P5

***V***V***
*1***2***3*
*4***5***6*
*7***8***9*
*10**11**12*
*13**14**15*
***********

Meter set to 20vdc
Red lead to pins 1, 2, 3
Black lead to pins 4, 5
Reading should be 10.3 vdc (could read high 13vdc as it is unregulated)

Meter set to 200vac
Red lead to pin 6
Black lead to pin 7
Reading should be 36 vac

Meter set to 20vac
Red lead to pin 8
Black lead to pin 9
Reading should be 6.3vac

Meter set to 200vac
Red lead to pin 10
Black lead to Pin 14
Reading should be 80vac

Meter set to 200vac
Red lead to pin 11
Black lead to pin 13
Reading should be 65vac

A/R I
Remove the 9 pin connector P7 (P5 on the power brick must be plugged back in)

__^__^__
*1**2**3*
*4**5**6*
*7**8**9*
*********

Set meter to 20vdc
Red lead to pins 5, 6
Black lead to pins 1, 4
Reading should be +5vdc (could be as high as 7 or 8 vdc because there is no load)



that's what i'm doing tonight boys,,, ya that's right i just might have a naked lady picture taped to the back of my multimeter,, and when i am checking countinity and t;he mulitmeter beeps it's like i am doing the sex, with a naked lady